PMF Home Page

PMF Buyers Guide

   About PMF
Feature Stories
Coming Events
Archives
Search
Links
Forum
Contact Us
Classified Ads
Home


November/December Injection Molding Innovation

In-Mold Coating Process Provides Class ‘A’ Surface

Paint is applied to the thermoplastic material as part of the mold cycle.

The In-Mold Coating (IMC) process applies paint to heat resistant thermoplastic as a part of the mold cycle, resulting in a molded part with a class “A” paint surface as well as savings in time, equipment and material costs. Pictured is a motorcycle side cover painted using IMC.
The new In-Mold Coating (IMC) process from UBE Machinery Inc. applies paint to heat-resistant thermoplastic as a part of the mold cycle.The result, the company says, is a molded part with a class “A” paint surface, as well as savings in time, equipment and material costs.

In traditional systems, the thermoplastic part is molded, cooled then moved to the finishing area for painting. With the new IMC process, the entire controlled procedure takes place during a single mold cycle. After the part is molded, the tool is opened, paint is injected and the tool is closed again. By controlling the mold position on the electric injection molding machine, a class “A” paint surface that is identical to the cavity surface — free sagging, pinholes and craters — is achieved. In addition, the number of defective parts is reduced since airborne contaminants cannot affect part quality.

Environmentally Friendly Finish

Because the paint is inserted directly onto the product surface, the process achieves a 100 percent transfer efficiency. Also, because the paint is composed of 100 percent solids, no volatile organic compounds are released into the air, which makes it ideal for use by companies in non-attainment zones. Other features of the finishing material include weather and chemical resistance. The specialized paint was developed by Japan-based Dai Nippon Toro (DNT) and is available in the United States from Sherwin-Williams.

The material has been successfully tested on a variety of thermoplastics including ABS, PC/ABS alloy and PC/ASA alloy and can be color-matched to existing products.

Patents for the paint and process have been applied for by DNT and UBE. The In-Mold Coating process will become available on UBE electric injection molding machines in 2002. As with the Dieprest Skin-Insert Molding Process, it can be retrofitted to existing UBE electric machines as well.

For more information, contact Taku Tawarada, UBE Machinery marketing and sales manager, at (888) 823-6224, www.ubemachinery.com.

Click here to go back to the PMF feature articles.


Plastics Machining & Fabricating
P: (847) 634-4347
F: (847) 634-4379
EMAIL:
hfrankurba@aol.com
P.O. BOX 1400
LINCOLNSHIRE
ILLINOIS 60069